Eaton Corporation Quality Inspection Lead in Irvine, California
Eaton’s Aerospace division is currently recruiting for a Quality Inspection Lead on 1st shift to join our team. The position is based at our Irvine, CA location.
This position reports to the Quality Inspection Supervisor. Responsible for providing support and guidance to personnel in the functions responsible for Receiving Inspection, Final Inspection, First Article Inspection, and Customer Delegate Inspection. Responsible for providing assistance in the orientation, training, work schedule, and assigning work to ensure adherence to company, and customers’ quality standards.
Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It’s where bold, bright professionals like you can reach your full potential—and where you can help us reach ours
You will be coordinating the inspection of aerospace components, sub-assemblies and/or assemblies (Visually and dimensionally).
You will be coordinating proper review and acceptance of paperwork and documentation used in the acceptance of product and ensures that data processing/move transactions are performed correctly. You will also coordinate proper execution, review, and approval of first article inspections per AS9102 standard.
You will coordinate appropriate cross-training of precision measurement equipment such as, but not limited to, surface plates, optical comparator, surface plate, CMM, calipers, micrometers, pin gages, thread plugs, thread ring gages, etc.
You will provide proper support to suppliers and internal/external customers in the communication and investigation of issues.
You will be responsible for shift schedule to include: work assignments/rotations, employee training, employee vacations, overtime assignment, back-up for absent employees, meetings, and shift rotations.
You will maintain safe and clean work environment by educating and directing personnel on the use of equipment and maintaining compliance with established policies and procedures.
You will be responsible for the achievement of company and department goals and objectives.
You will provide guidance to the team based on management direction.
You will maintain appropriate customers’ DQCR/DSQR inspection coverage (Approved Delegates) for all customers that delegate Source Inspection to Eaton.
You will guide Inspectors to ensure they adhere to all flowed down contractual (internal and external) requirements of customer purchase orders and suppliers purchase orders for commercial and/or military products.
You will inspect aerospace components, sub-assemblies and/or assemblies visually and dimensionally for conformance to manufacturing drawings, quality control specifications and supplier/customer requirements.
You will be responsible for review and acceptance of paperwork and documentation used in the acceptance of product.
You will be responsible to produce necessary manual or computer-generated inspection reports to accept or reject products.
You will complete data processing move transactions as required.
You will evaluate and adheres to all flowed down contractual (internal and external) requirements of customer purchase orders, suppliers purchase orders for commercial and/or military products.
When we embrace the different ideas, perspectives and backgrounds that make each of us unique, we — as individuals and as a company — are stronger.
We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
Required (Basic) Qualifications
Must have a High school diploma or General Education Degree (GED) from an accredited institution
Minimum 5 years’ experience as an Aerospace Inspection Lead person; and/or minimum of 8 years of Aerospace Quality inspection.
Minimum of 5 years of experience with using a CMM and comparators.
Relocation is not offered for this role. Candidates must reside within a 50-mile distance of the Irvine, CA facility to be considered
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee
Must be authorized in US without company sponsorship
Attendance/Punctuality/Dependability - Is consistently at work and on time; Uses time efficiently; follows instructions; commits to long hours of work when necessary to achieve goals. Able to work efficiently under fast pace environment.
Quality/Quantity - Demonstrates accuracy and thoroughness; meets productivity standards; completes work in timely manner.
Safety and Security - Follows safety procedures; reports potentially unsafe conditions; uses equipment and materials properly.
Technical Skills - Pursues training and development opportunities; strives to continuously build knowledge and skills.
Oral Communication – Speaks English clearly and listens and gets clarification when needed; participates in meetings.
Written Communication - Presents numerical data in a legible manner; able to read and interpret written information.
Teamwork - Treats people with respect; contributes to building a positive team spirit; supports everyone's efforts to succeed.
Organizational Support – Follows all policies and procedures; upholds organizational values. Must be highly motivated and committed to high quality standards.
Professionalism - Approaches others in a tactful manner; treats others with respect and consideration; accepts responsibility for own actions.
Language Skills - Ability to read and interpret documents in English such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to complete routine documentation. Ability to speak clearly and effectively with Manager/Supervisor, colleagues, subordinates, customers, suppliers, etc.
Mathematical Skills - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Reasoning Ability - Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form.
Computer Skills - Knowledge of Microsoft Office (Excel, Word, Outlook), internet, etc.
Possesses basic understanding of geometrical tolerancing and dimensional measurements per ASME Y14.5.
Possesses in-depth knowledge of AQL sampling selection per internal procedures or ANSI/ASQC Z1.4 or as directed by customers.
Possesses in-depth knowledge of acceptance test procedures (ATP), acceptance test reports (ATR), job travelers (process plans), pick lists, drawings, procedures, C of Cs, chemical & physical analysis reports, and test reports.
Experience working in FAA environment.
Must be able to work OT during the week and Saturdays when needed
Knowledge or experience inspecting various types of materials (e.g., aluminum, alloy, titanium, stainless steel, etc.).
Knowledge or experience inspecting aerospace products with coatings (e.g., anodizing, cadmium plating, chromium plating, nickel plating, zinc plating, passivation, etc.).
College or ASQ (American Society for Quality) certification a plus.
Basic knowledge of customers’ DQCR/DSQR programs and website portals
CMM programming is a plus
We make what matters work. Everywhere you look—from the technology and machinery that surrounds us, to the critical services and infrastructure that we depend on every day—you’ll find one thing in common. It all relies on power. That’s why Eaton is dedicated to improving people’s lives and the environment with power management technologies that are more reliable, efficient, safe and sustainable. Because this is what matters.
We are confident we can deliver on this promise because of the attributes that our employees embody. We’re ethical, passionate, accountable, efficient, transparent and we’re committed to learning. These values enable us to tackle some of the toughest challenges on the planet, never losing sight of what matters.
Region: North America – US/Puerto Rico
Organization: AER FMC Fuel Motion Control Systems
Job Level: Team Leader/Supervisor
Does this position offer relocation?: No
Travel: Yes, 10 % of the Time
Eaton is an Equal Opportunity and Affirmative Action Employer. Eaton is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law.
- Eaton Corporation Jobs