Stationary Engineer ( MERCUSR78454ENUS)
Are you looking for an exciting opportunity with a rapidly growing pharmaceutical manufacturer? If so, then this is the opportunity for you!
Our Manufacturing Operations teams are the people that make our products. We work in the manufacturing plants with a “Safety First, Quality Always” mindset striving for continuous improvement. We work in the local plant connected to our global manufacturing network to ensure the highest quality of raw materials, intermediates and finished products.
Under the supervision of the Maintenance Supervisor and direction of the maintenance team leader, operates, monitors, maintains, and ranswers to alarms of building utility systems including: water chillers, cooling towers, condenser water, high purity water treatment (softeners, de-ionizing and reverse osmosis units and stills), clean steam, building steam and condensate, compressed air and vacuum systems. Maintains logs, necessary paperwork, and completes documentation in a cGMP compliant fashion. Documents work activities completely through work orders and daily labor record. Stationary engineers will perform maintenance on any equipment or facility which their skills support in a compliant quality manner. Stationary engineers are part of the Utilities Technician work group and will primarily distribute work assignments within their job grouping with no inherent or “system imposed” limits. Based on business needs, Utilities Technicians will perform maintenance activities including crossing between job groupings where skills are common. Work assignments, buildings and equipment are not exclusive to any craft, job grouping , or employee. Position may include some responsibility for maintaining significant business systems (e.g. Maximo data, planning, procurement, and scheduling) including the authority to assign, coordinate, and maintain work for others.
Compressors, pumps, electric generators, package boilers, distilled water stills, water cooling towers, deionized water units, reverse osmosis units, water softeners, clean steam generators, condensate, equipment, vacuum pumps, heating equipment, water chillers, chemical treatment and testing equipment, computer-aided control/management systems catalytic oxidizers, and all other equipment necessary for the operation of building utility systems.
Maintains proper pressures and temperature in the operation of heating and cooling equipment, including chillers, cooling towers, perimeter heat, reheat, etc. systems to meet variable load conditions. Maintains appropriate oil, glycol and cooling water parameters as required by utility systems. Chemically cleans heat exchangers and circulating systems, adhering to department safety requirements.
Operates distilled water, deionized water, reverse osmosis, water softener, water pretreatment, and reheat systems.
Troubleshoots and routinely maintains, regenerates, acid cleans, adds or changes resin, and disinfects these systems as necessary. Monitors capacity, adequacy of utility services, and quality to insure proper operation of this equipment.
Adheres to cGMP requirements applicable to these systems.
Maintains operation of high purity water systems to provide pressure, quantity, and quality in accordance with production and cGMP requirements.
Insures proper operation of gauges/instrumentation (temperature, flow, conductivity, resistivity, pH, pressure, etc.) and changes recorder charts as necessary.
Conducts daily tours of utility equipment and reports problems concerning instrumentation and control Maintains records of operating details, including daily shift reports and logs, to provide shift-to-shift communications between both supervisory and stationary engineer personnel. Works with supervisory, engineering, and customer personnel to assure proper operation, maintenance and repair of utility equipment.
Prepares utility equipment and systems for modifications and/or tie-ins performing necessary shutdowns and isolation of valves following safe hazardous energy control procedures. Returns systems to normal operation.
Performs routine testing of water systems, cooling tower water, closed loop cooling and heating systems. Maintains necessary chemical treatment at specified parameters, e.g. level, pH, conductivity, etc.
Performs necessary operation and maintenance checks to insure that building utility related systems are operating as efficiently (energy consumption, water use, etc.) as possible, with minimum losses and optimum applied capacity.
Maintains utility equipment in good operating condition as it applies to oily, packing, cleaning, adjustments, and safety conditions.
Performs preventive and corrective maintenance and emergency repairs as needed by the equipment and systems for which responsible to provide continued utility system operation.
Insures the proper housekeeping conditions are maintained in mechanical rooms via proper storage of equipment and supplies. Performs miscellaneous clean up as necessary.
Operates two-way radio communications for normal, alarm, and emergency dispatch in a professional manner. Replies to WPMS alarms as required in a timely and professional manner.
Operates computer workstations for monitoring and operational status of equipment and systems where applicable.
Provides guidance to General Workers and Maintenance personnel when working jointly on assignments.
Performs all duties necessary to insure that the quality and quantity of service is maintained via proper operating conditions throughout the Building Utility area.
Completes department training requirements, e.g., orientation, SOP, safety, etc. as direct by supervision.
Attends and actively participates in HAZOPS, waste walkthroughs, Kaizen events, or any other operations, lean six-sigma, quality, safety or environmental training/initiative.
Prepares and assists technicians, supervisors and planners in preparing labor and material estimates.
Assists supervising with the assigning, scheduling and prioritization of work order requests using maintenance management system.
Makes recommendations and prepares orders for spare parts, additional stock room items, tools, etc.
Consults with Supervision and other mechanics on problem resolution/troubleshooting. Keeps Supervision informed of problem issues.
Education Minimum Requirement:
HS Diploma or equivalent (GED)
Graduation from a recognized/accredited trade school with at least six months full-time emphasis (5 hours/day x 3 days/week) in industrial power plant and refrigeration equipment operations
Navy Boiler Technician and Machinist Mate, State Stationary Engineer Seal, and Merchant Marine QMED or Engineer programs/licenses meet this requirement.
Courses in high purity water, cooling towers, water treatment, reverse osmosis, steam utilization.
Required Experience and Skills:
Three years recent (within last ten years) full-time experience (6,000 hours) operating industrial power plant equipment and controls (must include: chillers, cooling towers, air compressors, and water treatment equipment). A basic understanding of chemical and water treatment and computer use is required.
Held the position of Stationary Engineer at our Company West Point within the last seven years.
Recent experience operating centrifugal chillers (electrical and turbine driven) greater than 600 tons, air compressors and desiccant air dryers greater than 250 cfm, and high purity (WFI and USP grade) water system equipment including reverse osmosis, deionization, vapor compression and multi-effect distillation units. Operational experience in the emergency/building electrical generators and hands-on experience with hazardous energy control (lockout/Tagout) procedures.
Equipment or Machinery Operated:
Air compressors, refrigerated and desiccant air dryers, package boilers, water softeners, deionizers or demineralizers, reverse osmosis and installation equipment, clean steam generators, electrical and turbine driven centrifugal chillers, absorption chillers, water cooling towers, condensate equipment, vacuum pumps, catalytic oxidizers, closed-loop building water systems and chemical treatment and testing equipment, and all other equipment necessary for the operation of building utilities systems.
Special Skills or Abilities:
Ability to analyze equipment and take appropriate corrective measures.
Ability to read blueprints, control drawings, P&IDs, etc.
Familiarization with valve, mechanical equipment, maintenance, and instrumentation and control procedures.
Special Job Features:
Heavy lifting, use and handling of solvents, acid and bases and heaty transfer media, work in hot and cold and dust and dirt environments, subject to immunization, safety shoes and glasses, subject to emergency call-in, working in confined spaces and at heights, possible work in areas of potentially infectious agents, and available at all times during work shift to answer emergencies.
Our Manufacturing & Supply Division is dedicateedd to be the most trusted supplier of bio-pharmaceuticals worldwide. Our facilities, along with our external contractors, suppliers, and partners, create an interlinking global manufacturing network that’s dedicated to delivering a high quality, reliable supply to customers and patients on time, every time.
Who we are …
We are known as Merck & Co., Inc., Kenilworth, New Jersey, USA in the United States and Canada and MSD everywhere else. For more than a century, we have been inventing for life, bringing forward medicines and vaccines for many of the world's most challenging diseases. Today, our company continues to be at the forefront of research to deliver innovative health solutions and advance the prevention and treatment of diseases that threaten people and animals around the world.
What we look for …
In a world of rapid innovation, we seek brave Inventors who want to make an Impact in all aspects of our business, enabling breakthroughs that will affect generations to come. We encourage you to bring your disruptive thinking, collaborative spirit and diverse perspective to our organization. Together we will continue Inventing For Life, Impacting Lives while Inspiring Your Career Growth.
NOTICE FOR INTERNAL APPLICANTS
In accordance with Managers' Policy - Job Posting and Employee Placement, all employees subject to this policy are required to have a minimum of twelve (12) months of service in current position prior to applying for open positions.
If you have been offered a separation benefits package, but have not yet reached your separation date and are offered a position within the salary and geographical parameters as set forth in the Summary Plan Description (SPD) of your separation package, then you are no longer eligible for your separation benefits package. To discuss in more detail, please contact your HRBP or Talent Acquisition Advisor.
Current Employees apply HERE
Current Contingent Workers apply HERE
US and Puerto Rico Residents Only:
Our company is committed to inclusion, ensuring that candidates can engage in a hiring process that exhibits their true capabilities. Please click here if you need an accommodation during the application or hiring process.
For more information about personal rights under Equal Employment Opportunity, visit:
We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace.
Search Firm Representatives Please Read Carefully
Merck & Co., Inc., Kenilworth, NJ, USA, also known as Merck Sharp & Dohme Corp., Kenilworth, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails.
Travel Requirements:No Travel Required
Flexible Work Arrangements:
Valid Driving License:
Number of Openings:5