Jobs for Veterans, Veteran Job Board |

Post Jobs

Job Information

DynCorp International LLC. Avionics Technician II in MILTON, Florida

Job Summary

TheAvionics Technician IIperforms aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot complex electrical / avionics discrepancies.

Principal Accountabilities

(Typical duties include the following, although specific duties vary by assignment or contract.)

  • Use schematic diagrams, blue print drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.

  • Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification and repair of avionics / electrical systems.

  • Use the T-6 Maintenance Manual, NATOPS and factory published manuals to operate and test respective aircraft avionics components.

  • Initiate and complete applicable maintenance forms in NALCOMIS OOMA/VIDS MAFS as required.

  • Order parts and materials.

  • Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. Operate ground support equipment.

  • Identify and treat avionics/ electrical corrosion.

  • Perform aircraft jacking and hoisting as required.

  • Perform certification and re-certification of altimeter systems.

  • Perform calibration of directional guidance systems.

  • Required to perform collateral duty inspections.

  • Must obtain and keep current turn qualification.

  • Maintain cleanliness of the work center.

  • Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.

  • Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility and job assignment.

  • Assist as directed to ensure safety, security and preservation of government / company owned equipment.

  • Present a courteous and professional demeanor when dealing with customers.

  • Furnish and maintain own hand tools.

  • Operate portable fire fighting equipment.

  • Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.

  • Performs other related duties as directed by management.

Knowledge & Skills

  • Demonstrate the ability to read and comprehend schematic diagrams, generate, sign off and order parts utilizing NALCOMIS OOMA/ VIDS/MAF OPNAV form 4790/60, utilize aircraft electrical/ avionics systems and applicable maintenance / technical manuals and publications.

  • Demonstrate a basic knowledge of aircraft systems and nomenclature.

  • Possess working knowledge and skill in the use of basic tools and test equipment.

  • Must be familiar with the operational capabilities and limitations of electrical / avionics systems.

  • Possess a working knowledge of the detection, prevention and treatment of corrosion.

  • Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.

  • Must obtain and keep current turn qualification.

Experience & Education

  • Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on the job training and / or experience working with similar avionics systems and components is required.

  • Graduation from high school or GED required.

  • Must be able to meet any Government / Company licensing / qualification requirements for the position.

  • Must have three (3) years experience in aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blue prints, drawings, wiring diagrams, schematics and normal safety requirement.

Physical Requirements/Working Environment

  • Requires sitting, standing, and walking for extended periods of time.

  • Requires frequent climbing, bending, stooping, squatting, crawling, crouching, kneeling, lifting, carrying, balancing and reaching above shoulder level, pushing or pulling weight up to 70 pounds.

  • Requires eye-hand coordination and manual dexterity.

  • Must have close vision to include color vision, peripheral vision, depth perception, and the ability to adjust focus. Requires hearing to normal range.

  • May require use of respirator.

  • Requires shift work and a diversity of working conditions that range from a standard shop/hangar type environment, where there may be no physical discomfort, to an environment where inclement weather may subject individual to severe changes in temperature, direct sun, wind, rain, etc.

  • May be required to work in areas where noise hazards are prevalent.

  • Exposure to high intensity noise levels, extreme changes in temperature, materials identified on Material Safety Data Sheets; working on or around aircraft and machinery.

  • May be exposed to electrical shock hazard.

  • Work location is aircraft maintenance shops, hangars, and flight line.

  • May require travel in support of cross-country rescue and detachments of unknown duration.

Job: *Aviation / Support

Title: Avionics Technician II


Requisition ID: 2003471

DynCorp International is an Equal Opportunity Employer of Minorities/Women/Individuals with Disabilities/Protected Veterans. DynCorp International provides reasonable accommodation for qualified individuals in accordance with applicable federal law. The company will provide reasonable accommodation for the known physical or mental limitations of qualified employees and applicants with disabilities unless doing so would impose an undue hardship on the company’s operations. Applicants who need a reasonable accommodation during the employment application process should contact 817-224-7459. Please note that only those inquiries concerning a request for reasonable accommodation should call this number.